Thursday, 29 January 2015

Makerspace Showcase: Developing Ideas

Design Specifications

  • Made out of newspaper stixx
  • Support: Can support at least 60 kg
  • Durability: Used sometimes (30 mins each time 3 times a week) for at least 4 months
  • Rock-able chair
  • Comfortable
  • Covered by cardboard for better look
  • Maximum: 140(cm) long, 80(cm) wide, 90(cm) tall

Design Ideas:


Chair (1)


The diagrams show the main measurements and the 3D model gives a sense of what it looks like with the stixx as lines. This is for my original net-chair design, and I could go to the model in sketch-up and look at the measurements if I need to. It does have a lot of newspaper stixx, but it is the only way this kind of shape of "the purpose of the design" can sustain up to 60 kg. It is only the time to worry, I am sure there is enough newspaper for this in the staff's room.
Pro's: Original, strong structure with the intersections and triangles, interesting
Con's: Lots of newspaper (waste), time-consuming, very challenging, The cloth and the tying of cloth has to be very strong, and I need a large cloth

Chair (2)



The other chair is based on the one I found on the Internet. This one has 2 sides which are trapeziums but with round bottoms. Between the sides are 2 boards formed by newspapers. one is for sitting on, and one is for lying on (for the back). I will add a round bottom or a back to it for stability.
Pro's: It is more comfortable because it sits like an actual chair; It is not that long so it is space efficient; It might be a little more normal design (Pro & Con)
Con's: Still lots of newspaper; The board made from newspaper in between might be hard to support - The two sides can bend easily

Chair (3)




This is a more relaxing chair where you can actually lie down. Or it can also be for sitting on sideways. It might be able to support 2 kids on each side too. The con is that the shape on the top doesn't give many flexibility for how to place the sticks, so I would go with how it looks like in the picture, which is going to require many stick making and cutting.
Pro's: There are multiple ways to sit on it, less high so it's easy to get on and off.
Con's: Not much compared to the other ones

Chosen Design:

I chose Design (3).
  1. It is because it seems to be the most stable, and would be the safest path. It is already quite a risk to choose to make a big, rock-able, chair out of newspaper stixx, and I think now I better choose a safer path. The reason this seems to be more stable is that it is long, but short (in height). So the overall pressure is more spread out. And in case it breaks, someone won't fall on their back so heavily because he/she is low.
  2. It is because there are multiple way of sitting on it, and it seems easier to get on and off, and even children can climb up and down. I think that makes it more useful, meaningful, and interesting.
  3. It is because it is shorter and a bit smaller, so it would be easier to carry around and would take up less space at home.
  4. It is because this one seems to have a lot of newspaper stixx, but a lot of them are very short, so I believe and can cut a full-length stick apart and use it as two sticks. So it uses less resources and time.
And I didn't pick the other ones - even (1) seems to be more unique and "interesting" and (2) seems to sit more comfortably, and can use as a proper chair while working - exactly because of the opposite reasons why I picked (3).

List of Materials:

  • Newspaper-stixx machine/roller - To roll the newspaper stixx to build the chair out of
  • Newspapers - To be rolled out of
  • Glue - So the newspaper will stick together and also for providing hardness to the stick
  • Container - For glue
  • Saw - For cutting newspaper stixx to the precise length, also so that I use more than once while only rolling once
  • Plastic "strands": For tying the newspaper stixx together

Other Materials:

  • Water - to mix with the glue
  • Cloth - For wiping the glue off and cleaning the rolling machine afterwards
  • Brush - to put the glue on

 Drawing, Description, Measurements:

I group some measurements together keeping them close to or under 50 cm. The purpose of gourping them together is so that I don't have to crank as many stixx as I need, I can use a saw to easily cut them instead as the are paper. This will save time, paper and glue.

1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22

No comments:

Post a Comment